In a recent study published in the journal Materials, researchers from the Czech Republic developed hybrid prepreg tapes (rectangular cross-section) from glass multifilament roving (circular cross-section) and epoxy matrices using controlled mechanical spreading technology. Fiberglass Direct Roving For Weaving
Study: Hybrid Prepreg Tapes for Composite Manufacturing: A Case Study . Image Credit: Gorodenkoff/Shutterstock.com
The researchers characterized the strength distribution of the glass fiber, roving, and tape using the three parameters’ Weibull distribution model and the quantile-quantile plot-based exploratory data analysis tool. The resulting glass fiber-epoxy tape composite demonstrated improved mechanical tensile properties and adaptivity to complex robotic winding.
Commercial glass has a high hardness between 5.5-7 Mohs and high tensile strength between 2400-4500 MPa in its fiber form. This makes glass fibers cheap and robust reinforcement fillers in many composite materials which demand high strength, thermal insulation, acoustic insulation, electrical insulation, and corrosion resistance in various fields such as automobile, aerospace, marine, sporting, and constructions.
Most commonly, thermoset resins are used as a binder to ensure the cohesion of the composite, and distribute and dampen the impacts or stresses to protect the composite from the environment.
Robotized winding by using hybrid tapes (developed at TUL). Image Credit: Venkataraman, M et al., Materials
The glass multifilament rovings are a set of unidirectional glass fibers. These rovings are spread into a tape form with a rectangular cross-section followed by interweaving into prepregs mats and then pre-impregnated with a thermoset resin. The rectangular cross-section (uniform thickness) of the prepreg tape evenly distributes the tensile stress and absorbs the impact stress more effectively. The more the glass fiber filaments are parallel, and the higher the close packing, the higher the strength of the composite.
In this study, researchers fabricated hybrid prepreg tapes from glass multifilament rovings comprised of aluminosilicate E-glass fibers and an epoxy matrix consisting of a mixture of acrylate polymers and epoxy-silane, using controlled mechanical spreading technology.
The obtained spread tow tapes (STT) were coated with a commercial epoxy resin and pre-cured at 80 ℃ for 24 hours in the presence of a catalyst. Finally, the epoxy cured STT were cross-winded on a paper roll to obtain the prepreg sheet. The facile spreading process had a limited honeycomb arrangement of fibers in the roving cross-section, and in that close honeycomb structures, the filaments were arranged in hexagonal concentric layers.
Furthermore, for a fixed filament fineness and corresponding filament diameter, the spread tow had the same shape characteristics as tow. The microstructures of the glass fiber, roving, and tape were studied using scanning electron microscopy (SEM) and the corresponding strength distribution was analyzed using the three parameters’ Weibull distribution model and the quantile-quantile plot-based exploratory data analysis tool.
The SEM images revealed that the tapes were approximately rectangular in cross-section and were slightly undulating, whereas the rovings were slightly wavey and the straps were straight.
The quantile-quantile (Q-Q) graph for normal distribution indicated differences in the lower and upper tail regions from the assumption of normality. They assumed that the glass filaments broke first (i.e. the glass filaments have lower breaking elongation than matrix phase), which assisted in predicting tape strength.
Dependence of tape width on thickness under different assumptions. Image Credit: Venkataraman, M et al., Materials
The three Weibull distribution parameters, namely A (the shift parameter), B (the scale parameter), and C (the shape parameter) were positive. Moreover, the non-iterative method based on the Weibull moments was more reliable than the iterative non-zero threshold A approach. Also, the average strength of spread tow was higher than simple tow, indicating the strength in the composite exceeded the strength of the strongest component. The mean predicted strength was 1.1835 GPa with a standard deviation of 0.0117 GPa.
In this study, researchers fabricated hybrid prepreg tapes with uniform rectangular cross-section from aluminosilicate E-glass fibers multifilament roving and acrylate polymers and epoxy-silane-based thermoset epoxy matrix using controlled mechanical spreading technology. The STT tapes were closely packed, evenly spaced along with the tape, and uniformly coated by the epoxy resin, which imparted high impact strength to the desired rectangular cross-section.
Further, the fiber strength distribution was successfully predicted by the three parameters A, B, and C of the Weibull distribution model and Q-Q normal distribution plot. The obtained strength of the hybrid prepreg had a high mean value of 1.1835 GPa with a standard deviation of 0.0117 GPa. Hence, this STT hybrid prepreg tape can be used in robotic winding, which requires high mechanical tensile properties.
Venkataraman, M., Militký, J., Samková, A., Karthik, D., Křemenáková, D., Petru, M., Hybrid Prepreg Tapes for Composite Manufacturing: A Case Study. Materials, 2022, 15, 619. https://www.mdpi.com/1996-1944/15/2/619
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Bismay is a technical writer based in Bhubaneshwar, India. His academic background is in Engineering and he has extensive experience in content writing, journal reviewing, mechanical designing. Bismay holds a Masters in Materials Engineering and BE in Mechanical Engineering and is passionate about science & technology and engineering. Outside of work, he enjoys online gaming and cooking.
Please use one of the following formats to cite this article in your essay, paper or report:
Prakash Rout, Bismay. (2022, January 19). Glass Multifilament Roving to Produce Hybrid Prepreg Tapes. AZoM. Retrieved on September 20, 2023 from https://www.azom.com/news.aspx?newsID=57934.
Prakash Rout, Bismay. "Glass Multifilament Roving to Produce Hybrid Prepreg Tapes". AZoM. 20 September 2023. <https://www.azom.com/news.aspx?newsID=57934>.
Prakash Rout, Bismay. "Glass Multifilament Roving to Produce Hybrid Prepreg Tapes". AZoM. https://www.azom.com/news.aspx?newsID=57934. (accessed September 20, 2023).
Prakash Rout, Bismay. 2022. Glass Multifilament Roving to Produce Hybrid Prepreg Tapes. AZoM, viewed 20 September 2023, https://www.azom.com/news.aspx?newsID=57934.
Do you have a review, update or anything you would like to add to this news story?
At the Advanced Materials Show 2023, AZoM sat down with Tom Warwick, Director and one of the two Founders of Blue Scientific, to discuss the rapid growth of the business and its ambitions for the future.
Phil Levesque & Charlie Pryor
In this interview, AZoM speaks to Instron's Phil Levesque and Charles Pryor about the importance of mechanical testing for electric vehicle batteries.
In this interview, Instron's Landon Goldfarb discussed the importance of mechanical testing for medical devices used in diabetes care and treatment.
Discover the XSeeker 8000 by Tinius Olsen - a compact benchtop X-Ray computed tomography (CT) system.
PILATUS4 R detectors for laboratories enable fast data collection, thanks to their large active area and high quantum efficiency.
ModuleSci’s PE-100 is a compact SEM for full-size performance and is ideal for larger sample imagery.
The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show
The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.
In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.
AZoM.com - An AZoNetwork Site
Ecr Roving For Pultruded Grating Owned and operated by AZoNetwork, © 2000-2023